Questions & Answers for: brush roll

Ad

Question about G4 Bagged Upright Vacuum

1 Answer

...brush roll bearings? brush roll bearings can be adjusted to lower the brush closer to the carpet when worn. to do this remove the front brush assembly, there is usually a sticker below the belt hole ...

Ad

Question about Altima Upright Vacuum Model 2996AVS Vacuum

1 Answer

...brush roll cover 3) Lift and remove brush roll cover . 4) Remove brush roll and belt. Thread new belt around motor shaft and brush roll 5) Insert left end of brush roll first. Make sure square on ...

Ad

Question about 3522 PowerForce Bagged Upright Vacuum

1 Answer

...brush roll is seized. Remove the brush roll (see picture) and make both of the end caps spin freely. If not, replace it and you should be set. *An example of a brush roll* Make sure that the brush ...

Question about 4235AZ Upright Vacuum

1 Answer

...brush roll cover. (Fig. 2). 3) Lift off brush roll cover. (Fig. 3). 4) Remove brush roll and belt. Thread new belt around motor shaft and brush roll (Fig. 4). 5) Insert left end of brush roll first. ...

Question about G4 Bagged Upright Vacuum

1 Answer

...brush roll is not spinning. The belt may be stretched and need replaced. The brush roll may be installed improperly. The magnet in the brush roll has to be aligned with the indicator light for the ...

Question about Vision Cyclonic Canister Vacuum, SD40025

2 Answers

Why

brush roll may be clogged. Unplug the cleaner and remove any debris from brush roll. 2. Make sure the brush roll setting is turned on. The brush roll on/off switch is located on the handle of the hose

Question about U5434-900 WindTunnel Plus Bagged Upright Vacuum

1 Answer

...brush roll. Remove bottom plate and pull the brush roll out. Clean hair and debris from brush roll and make sure it spins freely. Remove end caps from brush roll if possible and clean debris out. ...

...brush roll. There may be something stuck somewhere in there. Remove the brush roll to see if the brush roll end caps will spin freely. If there is hair or debris restricting the brush roll may be ...

Question about Carpet Cleaner Powerbrush Deep Cleaner Vacuum

1 Answer

...brush roll has stopped spinning on your Shark Rotator. Here are a few things to check for when trying to fix your Shark. First things first lets focus on the brush roll. Unplug the vacuum and turn it ...

Question about Carpet Cleaner Powerbrush Deep Cleaner Vacuum

1 Answer

brush roll, remove the brush roll and belt and reverse the process with the new belt. Some models have the brush roll held in by screws and/or brackets, some brush rolls slide down into slots. Replace

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

D. Floyd Kolb
D. Floyd Kolb

Level 3 Expert

43501 Answers

Are you a Vacuums Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...