...Printer should connect using a usb port, Unless its an ethernet port for the printer then you will need a router to connect both printer and computer. Are you using a High Speed connection or a dial ...
usb hub of your printer is located inside righr near the cartridges look in the back of the printer thats usally where its at or on the side it wont be like a usb cable it will be slightly bigger than
Question about MFC-3240C All-In-One InkJet Printer
...the top cover (to expose the cartridges) and look to the left of the black cartridge you'll see the usb port. There's a route for the usb cable to run to the back of the printer down the right
Wireless printer problem Wireless computer recognizes Wireless Brother MFC-495CW printer, but states printer is ''offline.'' Printer is turned on. Still cannot print. Brother has posted a Network ...
Question about Multi-Function Center MFC-240C All-In-One InkJet Printer
...usb port to plug in the printer Brother MFC -240C It is located under the scanner cover, under the glass, if you look at the right side of the machine there is a groove to place your figer to ...
...USB port of printer and the USB port on back of computer. If not, connect directly to both the printer and computer and try to print. If the printer does not print, go to step 3. 2. VERIFY THAT THE ...
...should be in port number 1, the printer can be be wireless or cabled into port 2 of the router. This way you have the internet and can still print wirelessly to the printer and so can anyone
where is the printer port for a brother mfc 9560 This Brother printer has USB, LAN and wireless connections and the USB and LAN port are located at the back of the printer.
Question about MFC9560CDW AllInOne Laser Printer
...printer to the wireless router.To print from your HP laptop, check the IP address range your wireless router issues to your wireless network, it maybe 192.168.1.*** then configure the brother printer ...
Question about DCP-J140w Wireless Compact Inkjet All-in-One Dcpj140w
...printer and the computer. If it is connected to your wireless network, did you ensure that the firewall allows the communication? (Some firewalls will automatically add the correct ports to the ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions