...shadow" print on letterhead and envelopes Our HL2040 is printing the address twice on envelopes. It prints normally, and in the right location, and then it prints a fainter shadow of the text also. ...
...shadow image of the check. It's like the image is stained on the roller bar or something. call brother and tell them that the drum is shadowing and needs to be replaced or you can look in your area ...
Question about MFC 420CN All-In-One InkJet Printer
...shadow printing by MFC 420CN Hi, My Brother MFC 420CN prints shadows or double text you can say in normal printing mode, I tried replacing all catridges but no luck there, any solutions??? yes. you ...
...Brother MFC-8860DN, purchased in April 2008 and used in a home office. There are dark marks, "shadows", on the left hand edge of all printing and copying. They seem to follow a pattern, there are 3 ...
Brother Intellifax 2820 shadow or ghost printing. I cleaned the corona wire by slide the tab over 10 times yet the text is shadowed on the paper. Have you replaced the fusing unit, the hot unit in the
Brother 4070CDW Shadowing Problem Brother 4070CDW problem: Text prints properly but is then also faintly shadowed about 3-4 inches below where it printed. Check your toner if they are properly ...
I am having trouble with shadowing on my printer quality. How do I correct this? If the shadowing is not related to the document being printed, You should change the drum! If the shadow is similar to ...
Question about MFC 7420 All-In-One Laser Printer
...shadow image My Brother MFC-7420 just started printing a shadow image halfway down page. Brother toner cartridge only 3 weeks old and had not done this before. The shadow image shows up on print mode ...
...shadow image halfway down page. Brother toner cartridge only 3 weeks old and had not done this before. The shadow image shows up on print mode and copy mode." error code c00f0401 of my hp officejet ...
Question about MFC-9440CN Laser Printer
shadow on prints - Brother MFC-9840CDW After changing the belt unit on our Brother MFC-9840CDW we have shadows on our print outs. It was so bad that I had to use the old belt unit & just reset the
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions