...printer, so I replaced the drum for another(original Brother DR-3100). Followed steps to reset the Drum counter. However when I close the front, the drum light still flashes. I try to print a status ...
Brother HL-5140 printer My printer's status light is on and the drum light (i just replaced drum). When I press print, the drum light goes off and the paper light starts flashing. There is no paper ...
Question about HL 5250DN Laser Printer
...printer" command and pointing to the unzipped temporary Brother driver directory. This does install the new driver, but to no avail - the status light is still red, and it doesn't print - not even a ...
...Brother HL 5140 Laser Printer Problem Paper is coming out crumpled. Red status light on, but paper jam light flashing amber - but can't find any paper in the machine. change the drum , the problem ...
...from power strip or power failure, just plain CPU failure. If it's under warranty, 1 year since purchase, you need a Brother service center, out of warranty a new printer would cost less than
...light on status Press and hold the GO and Cancel buttons together, the lights should then change to just the status and either the toner drum or paper light on. Depending on the lights that are ...
Brother HL-5170DN mono laser printer and now when I switch it on all I get is 4 yellow status lights continuously lit - it will not respond to anything, not even a reset - any ideas? if all the lights
...Status Monitor" in your printer display any errors? Is the printer cover securely closed? Is any of the LEDs in the printer flashing? What happened just before the printer stopped working? Did you ...
...Brother HL-5240, status light red, paper light flashing. Plenty of paper in the tray Ether the paper sensing lever is broken or there is dust accumulation or paper fragments inside the optical
Question about HL 5140 Laser Printer
...status light is normal indicating data going from computer to printer.the flashing paper light indicates a paper jam or out of paper. A sensor maybe not working properly or sticking. If your model ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions