Questions & Answers for: brother needle bar

Question about SE-270D Computerized Sewing Machine

1 Answer

...the face plate and breaking how can I adjust the needle bar? Make sure the needle is all the way up in the shaft/bar. It can work loose and slip down. Make sure you're installing the needle

Ad

Question about SE-270D Computerized Sewing Machine

1 Answer

...brother pe- 150 and the bobbin doesnt catch i need help with the timing See if you may have thread wound up inside the bobbin hole. The hook needs to cross the needle hole when the needle bar starts ...

Ad

Question about SE-270D Computerized Sewing Machine

1 Answer

...brother nx400 even-feed foot Remove the screw holding the regular presser foot and the presser foot holder and set aside. Place the take-up lever in the highest position. Hold the even feed foot with ...

Question about LS-2125 Mechanical Sewing Machine

1 Answer

...bar is not straight. Or, is there some place to tighten a screw that will straighten it out? Thank you Put in a new needle, it is bent, download a free manual, at www.brother-usa.com under ...

Question about LS-2125 Mechanical Sewing Machine

2 Answers

...Brother XR-65. The needle bar fell out as I was sewing. I need a repair manual or some instruction on how to secure the needle bar in the machine. I have the bar itself and a pin sized piece of wire ...

Question about XL-6562 Mechanical Sewing Machine

1 Answer

brother xl-6562 needle and assembly won't stay on needle bar. I was sewing on a heavy fabric and the needle assembly came off. Check the clamp for a crack it sounds like it may have been ...

Question about CS6000i Computerized Sewing Machine

1 Answer

brothe cs6000 needle bar noise noise while the needle bar moves up and down if the plastic compartment opens try using a couple of drops of sewing machine oil on the needle bar and see if that helps.

Question about SE400 Computerized Sewing Machine

1 Answer

...Brother SE-400 where the needle bar is completely seized. I was sewing, ran over a pin, and my machine just stopped. The wheel would not turn at all. I removed the plastic case and loosened the set ...

...needle bar of my brothers cs6000i is bent. The repair shop is asking $120 labour and $20 for the part. Is there any way I can fix it myself Needle bent and out of palace Hai, You can try to take one ...

...happened. Thank you. Sewing Machine Needle Bar Adjustment adjust sewing machine needle bar Google Search SETTING THE NEEDLE BAR Sewing Machine Repair Centering The Needle To Repair Your Sewing ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Are you a Sewing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...