...MFC-8460N model? Thanks! Same with me on my MFC 8870DW. The procedure worked perfectly: 1) Turn off printer 2) Press and hold menu button and turn on. Keep holding button until you see maintenance on ...
Brother 8460n Fuser Unit My printer read to change the fuser unit and reset my counter. What is a fuser unit and where do I get one? Do I really need one or can I just reset the counter someway? Hit ...
MFC into Maintenance Mode Press the Menu and Start Keys at the same time then press the up arrow key 4 times the machine should display "Maintenance " in the LCD display Press the 8 key twice, Display
life left for its laser and fuser - What do I so for that? If your prints are still looking good you can hold the 3 and 9 buttons together and arrow to the one you want to reset and reset them to 100%
...Brother support was not able to give me this information said I had to take the printer to a service shop. Fortunately, one of the shops told me this information. Ooooo. Big secret. What B.S. !!! ...
Question about MFC-8460N All-In-One Printer
BROTHER MFC 8460 ALL IN ONE. I HAVE THE PART. JUST NEED DIRECTIONS. Check out this Article for Replacement and Reset Procedure for the Brother 8460 http://www.fortwayneprinterrepair.com/wordpress/2012
...BROTHER MFC-8460N COPY MACHINE WILL ONLY COPY ONE PAGE AND SAYS THERE IS A JAM AND TO REMOVE THE DRUM AND CLOSE THE FRONT PANEL AND I DO THIS AND IT WILL WORK FOR ONE MORE PAGE. THERE IS NO PAPER JAM ...
reset fuser machine error 6a. How to fix this? Hello -This is a good question.,. and you have got me stumped! What I would do is contact the manufacturer's tech support line, they would be far ...
...brother mfc-9320cw fuser 1) Press the 3 and 9 buttons at the same time in the ready status.2) "Reset Menu" will appear on the LCD. Scroll to Fuser by pressing up arrow or down arrow button then press ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions