...Brother MFC- 8460N All in one printer and this morning and error message came up that said no paper. I tried taking the paper out and putting it back in, and turning the machine on and off and the ...
brother MFC 8460 No error codes. just says doc jam and clear the scanner then press stop key..... Hi There must still be a piece of paper in the machine check the fuser section at the rear of the ...
Brother 8460N fax machine less than 2 yrs old. Error messages PF kit/ fuser Replace the paper feeding (PF) kit and the fuser. Instructions on how to do so maybe found on this manual. i just replied to
Question about MFC-8460N All-In-One Printer
...Brother MFC-8460N any suggestions? Could be a tab or spring broken off of the feed tray, dirty feed roller can cause that error when paper doesn't feed. Paper guide too tight so that paper can't lift ...
Question about MFC-8460N All-In-One Printer
...Brother MFC-8460N error message no paper in tray tried cleaning. re loading, on-off. etc. Make sure the paper guide is not too tight, also set the paper tray on a table and look at the gear on the ...
Question about MFC-8460N All-In-One Printer
...fully inserted. The error states to close paper tray if it is closed then the paper tray sensor is bad and needs to be replaced. the part should not be that much like around $11 part number ...
Question about MFC-8460N All-In-One Printer
...Brother MFC 9440cn keeps giving a paper jam error message from tray #1 when there is no jam. Looks like paper cannot feed always try seting the paper to A4 not leter I have an MFC-8890DW that had a ...
Brother MFC8460N won't print/copy. It makes this loud clicking noise that's coming from the front where the tray goes. The error was a paper jam, but now it says to add paper to tray. The tray is full
...Brother MFC-8460N printer all-in-one. I have no error message and when I send to print the LED light flashes yellow but nothing prints. How can I get my printer to print? Did you check for paper ...
Question about MFC-8460N All-In-One Printer
BROTHER MFC-8460N / After inserting paper tray the machine will not pick up paper. There is a clacking sound & an error message: no paper Hi, Try this out. 1. Page Setup Paper (Paper source) - ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions