Questions & Answers for: brother dcp 7020 rear jam

back jam My Brother 7020 is jamming in the back top of the machine. It will go for several copies and then jam. clean the output roller

...to file, etc I have a DCP 7020 and can't seem to scan documents to file, etc Try updating the driver you didn't say if you are using VISTA or not? ...

DCP 7020 Brothers laser printer paper jam & back cover open fault The printer feeds paper and then stops with the paper 1/3 the way into the fuser. A fault "back cover open" appears. To clear you ...

...Brother DCP 7020 printer displays error The Brother DCP 7020 printer displays error message "Back cover open", even when it is closed. What do I do? back cover door switch is displace so it called ...

...Brother 7020. It doesn't get stuck, it just bunches up because it isn't feeding through the two rollers. How do I fix this? Download and install drivers ...

dcp 7020 "Back Cover Open" lights up even after it dcp 7020 "Back Cover Open" lights up even after it is closed and all steps to clean any paper jam are done... Try doing a power reset. Turn

dcp 7020 paper jams The printer jams, usually on the second and later pages. There is a spring-loaded, curved piece of plastic in the back that seems to fit too lose. The shop said that I took it to ...

how to replace paper feeding kit on DCP 7020 paper jams every other time and beginning to continuously jam Most likely all you need is to clean the rubber feed rollers. Use alcohol.

...Brother DCP-7020 inner chute in order to replace the Fuser unit? I was able to remove the rear cover and the rear chute cover but had difficulty removing the inner chute in order to replace the ...