Questions & Answers for: brother dcp 7020 fuser replacement

Toner not fixed to the page, rubbing off Having replaced both the drum and toner recently, I don't know which caused the problem. Now, images that print on page can be smudged off to the point of not ...

Brother 7020 printer "fuser error" Brother 7020 Printer won't print. Says, "fuser error. Turn machine off for 10 mins." The fuser has failed and needs to be replaced. If it is still under warranty ...

Brother, DCP 7020 The machine says it needs regular maintenance but I can't find the book. The machine is constantly jamming . The maint enance message is just that a message telling you you should ...

DCP 7020 Brothers laser printer paper jam & back cover open fault The printer feeds paper and then stops with the paper 1/3 the way into the fuser. A fault "back cover open" appears. To clear you ...

black vertical line on prints and copies. 20 blank copies will eliminate line, but as soon as I print something that draws on the toner the line is back again. Have replaced drum and toner without any

fuser. There is a black rod near the center that has a sensor flag on the right side. That flag goes thru a hole on the right into a sensor. That rod has a spring attached. If the rod is broken or the

I'm getting a black line down each document I scan. How do I get rid of it? Cartridge or Fuser replacement.

4 wide horizontal blurry lines in printed document Either sensitive drum of the tonner is damaged or the high temperature fuser roller damaged. Check and replace.

...Brother DCP-7020 inner chute in order to replace the Fuser unit? I was able to remove the rear cover and the rear chute cover but had difficulty removing the inner chute in order to replace the ...