...BROTHER DCP-7020 on the screen it says "change drum" I already did and it still says the same thing. Besides that when i try to print something i get the copy and I also get lines and words in very ...
...I turn it off and on and full the drum. When I put it back it keep saying "dash drum". Sound like machine is set to wrong lingo but it will be telling you to replace drum with new then reset
...DCP 7020. How do I reset the number after I install a new drum? Take it out and put it back in - the trick is to LEAVE THE FRONT DOOR OPEN after you put it back in. With the door still OPEN push the ...
Question about DCP-7020 All-In-One Laser Printer
BROTHER MFC 7820N MACHINE PUT IN NEW DRUM, CHANGE DRUM MESSAGE COMES ON. PUT IN NEW TONER, TONER END OF LIFE MESSAGE COMES ON. To manually reset the counters, do the following: Open front cover, press
DCP 7030 drum unit Reset DCP 7030 drum unit : -LCD- Press MENU and turn on printer - MAINTENANCE arrows 81 and OK -RESET DRUM COUNT press OK -RESET LIFE COUNT press CLEAR / BACK arrows 99 and OK ready
...7020, you remove the toner/drum, put it back in and DON'T CLOSE THE DOOR! When you power up the DCP, it will give you language about resetting the drum. Your manual will tell you how to step to ...
Question about DCP-7020 All-In-One Laser Printer
help On that one you open the front door and press options, it should ask if it's a new drum and you press 1 for yes and that should reset the drum count. The instructions are packed with the new drum
Question about DCP-7020 All-In-One Laser Printer
Brother DCP 7020 - I just installed a remanufactured drum, and the 'replace drum soon' warning still comes up Look at your toner cartridge. There is a white stud that is attached to a gear. On a brand
Question about DCP-7020 All-In-One Laser Printer
...drum and the 7020 still reads "Change Drum Soon" I've checked the positioning of the toner cartridge in the new dum; everything seems ok. I found somewhere that one needs to set the machine to ...
Brother DCP 7020 display reads "Drum Error" and instructs me to clean corona wire which I did. I then bought a new drum and still get the same message. You need to reset after a new drum, open the ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions