Questions & Answers for: brother 2030 drum

brother hl-2030 toner,drum,paper and ready led lights are all flashing this is a new unit Hi from what i have read on the internet and past experience with these printers (our company has 20 -30 of ...

brother hl-2030 printer, i cannot get rid of the drum error, i tried the drum on another printer and it works ok Drum is on an internal counter in the printer, so it will work fine on another printer.

...brother laser printer, the "drum" light is flashing. What is the drum? where is it? and what is it asking me to do? drum is the one attached with the toner. Open the front cover then you will see the ...

...2030 laser printer, on which the drum light continues to flash. I have replaced the drum and put in the new one properly, but the light won´t go off. Help please! Open the front door, and press ...

...Brother HL-2030 won't work; All LED lights are flashing My Brother HL-2030 won't work. All the 4 LED light are flashing. What to do? Use the software to diagnose the problem or check for a paper jam ...

...brother 2030 You need to open the front door and grab the toner/drum unit and pull as hard as you need to. once the assy. comes out you press the blue button on the left side and the toner cartridge ...

drum light keeps flashing wont print check if the DRUM are correctly installed, if are ok, consider replace it cuz the drum has and internal quartz bulb for heat up and sometimes they blew

brother hl-2030 - hi, is it possible to know how many pages a drum has printed? Most laser printer do not have a page counter, because the toner cartridge may come in a couple of toner sizes and there

...correct procedure in relpacing the drum unit. Check out the procedure @ http://www.inkjet-laser.com/how-to-change-the-drum-unitdr-350-brother-hl-2030-2040-2070n-laserjet-printers.html Hope it

...brother hl 2030 printer recently replaced toner and was all working fine tried to print labels sheet this morning via front loader and printed all black now all lights are flashing and it's ...