Questions & Answers for: broken usb xbox 360

...usb controller port are bent and or broken.Someone forced the controller wire into the port. How can the 2 usbs be replaced?Thanks,Daniel is it in the warrinty / do they cover it just call ...

...port, not the ethernet port. 2. Is there the possibility that the adapter is broken? i had the same problem. the usb on the adapter is f-ed up. you gotta stick like a piece of metal in the usb

usb to ground. Even though I found that this was my problem with my xbox unfortunately for me my board was also fried. From now on Im going to collect xbox's that are broken and use them to fix my new

broken usb port smashed prongs wont even come on i pullled out the play anfd charge kit on my xbox 360 and when i did it pulled the black piece out and also bent th prongs how do i fix it. help PLEASE

Xbox 360 - Ethernet and usb port broken Well, as it says above, the ethernet and usb port on the back of the xbox are broken go wireless

broken! I just had a ligtning storm near my house, so I turned of my xbox 360. Suddenly my house had a blackout and when i turned on my xbox 360 it wouldn't recognise the ethernet cable... I am pretty

...usb plugs in the front, one of them had broken and the 4 metal contacts had been pushed down and were touching the metal frame , as soon as I put a tool in and pulled them away the console worked ...

...broken the USB port there could be a short which is preventing the Console from turning on. Mske sure none of the pins are touching one another but make sure you turn off the console so you dont do ...

...broken usb ports. after a power outage it doesnt turn on and the brick light is orange You will need to send this in for repair. A good place that specialize in fixing USB is www.videogame911.com. ...

...broken USB port.  There are 2 in front and 1 in the rear.  If there are any broken prongs touching it will not power on....assuming you are getting power beyond your power supply.  Is ...