Questions & Answers for: broken needle fell sewing machine

Question about XR-65t Mechanical Sewing Machine

3 Answers

...Broken Needle Needle Bar Adjustment Oiling an Elna 3007 Getting the Timing Belt Off? What Size Needles for My Machine? How to Oil my Machine? Where to Oil?? Stitch Length Knob Woes Can't Seem to Put ...

Ad

Question about XL-6562 Mechanical Sewing Machine

1 Answer

broken, perhaps) -?- Long story short: the needle had fallen down into the machine; I removed the needle plate .. and upon leaning the machine over a bit to retrieve the needle (needls was on bottom)

Ad

...needle goes into fell off and the thread guide fell off it....i can't tell if it is broken or just fell off, but i can't put the thread guide back in...it just falls off. That can be tricky. Some ...

Question about CS-8060 Computerized Sewing Machine

2 Answers

...needle was down and the threader came off or broke. If it is not broken, you may be able to push it back into place. Turn off the power and tip the machine back on some towels so it does not slip and ...

broken needle at first. After gently moving the wheel back and forth the needle fell through and I was able to remove the broken needle. Now There is a dragging sound and feel when the wheel is turned

Question about PC-420

1 Answer

...broken off needle be stuck down in the mechanics and cause the next one to shatter? The second needle fell down into the crack as i was loosening the side screw to remove it. How do I access that ...

...the arm (left of the needle plate) is removable by prying (gently) on the front edge and sliding toward you. Unless the cutter is broken, you should be able to figure out how itall fits back

...the old broken needle. make sure the screw is loose. u can also rap the needle bar with a screwdrive handle to losen the needle. it should drop out, handy to have a small hemostat to grap the

broken needle that fell inside, now it won't turn on. Help if you still haven't got the machine to turn on, you may have to have it checked, if it has a computer in it, it could have done something to

...it can cause severe damage to your machine. I've actually picked my machine up and shook it to find the broken needle. Sometimes it drops straight through and is actually setting under the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Are you a Sewing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...