Questions & Answers for: Chevrolet Avalanche broken latch

latch on one side will not release plastic clip on tailgate handle is broken

...disconnect handle from side that's not working & pull on rod manually. ( thats if it's not broken already) You have probably broken rod from

...broken or come unattached to the latch. How can I get the tail gate open? How do I replace or reattach the rod to the latch? Hi;The latch/ouside handle is held on by four bolts on the inside of ...

...latch that are suppose to snag when closed) may be worn or broken. If that's the case, you'll need to remove the panels for your gate in order to get into and behind the latch. Also try spraying some ...

...spray WD 40 on both latches and inside latch mechanism. Work the latch to see if that frees it. If not, then you likely have something broken in the latch mechanism or the springs in the

tailgate latch broken how do I replace this? there are two rods connected to latch by plastic retainers. pop these off.there are three torrx head bolts on side of gate remove these and swap out latch

...broken tailgate latch out and the new one in TO REPLACE TAIL GATE LATCH. TAKE A SMALL SCREW DRIVER OR USE A TRIM TOOL PRY OFF THE HANDLE ESCUTCHEON. ONCE BOTTOM PRIED OUT PULL THE ESCUTCHEON DOWN AND ...

...broke.door handle clip that connects to latch rod broken.when you try open door handle not engage to latch rod.door not going open.have to replace door handle with new clip holds latch rod in

latch broken, how to get open, video tailgate latch broken, 2010 Chevrolet Avalanche, without being able to remove the tailgate's plastic cover, how can I get to bolts that must be removed in order to

the tailgate. How do I get that latch to release so I can fix it? Get a new rod clip at any auto parts store. Look for the broken clip at the bottom of the tailgate and take it with you to match it up