Questions & Answers for: NEC broken lamp

...lamp dosen't seem to be broken at all when i look at it. Somebody who have a solution to my problem? Thanks Morten From the manual: To reset the lamp hold down the "HELP" button on the remote for 10 ...

...or cover error. yes it was the problem of broken tab - which is holding micro switch of lamp was broken when removing the cover and it was disappeared in side of the projecter lete i found it thank ...

...lamp door, there are plastic protrusions that hit the switch activators. if they are broken off or warped, you need to replace the door/hood. if they are there, check the switch itself. replace as ...

...lamp protector door was broken near to the edge, which is used for control the door open sensor switch, i placed some 'L"type small plate and sticked with instant bond, Now the problem ...

Red colour does not appear on screen. It sounds like you have a bad VGA cable. Check for a bent or broken pin in the cable. These often show up as a loss of one particular color: red, green, or blue.

...the projector's menu. This is for reference only and will not keep the projector from coming on. If the lamp will not light make sure the lamp cover is all the way on and nothing has broken off of

...lamp is either missing, open or broken. It will not look broken but a critical part of the plastic has probably broken off. This will happen even if the cover has not been touched. Without it the ...

...broken lamps 1. As before, with lamp replacement, allow approximately 45-60 minutes cooling time before accessing the projector. 2. If there is no output from the lamp, ensure that all internal, ...

turning on If the lamp cover is loose then it work start. If no lights come on then the fuses have broken or the power supply.

...broken,you need a new DMD chip. we supply the new DMD chip,it's life is 6 years, and the price is USD200 Have a nice day! We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, ...