...chain broken or the tensioner not taking up the slack? chain ok, just replace the tensioner, right side of engine, below front of cylinder head. if it is the chain that broken, take it to a repair ...
...chain guide broken apart. did not jump time. Q. can i replace just upper tensioner and upper chain guide and retreive broken guide pieces from front cover that i can see? ecotec 2.2l dont see why not ...
chain was broken about 1.5 - 2 centimeters inside the wu pin. I took a chain connector (with some chain hanging off one end) and fed it into the hole, trying to connect it to the broken chain. After a
chain for broken links, if there are any broken ones walmart sells a tool in the bike section to replace broken link for around $5 if there are no broen links check the sprokets for any broken pieces,
...chain be broken and what's the difference between broken chain and jumping time? Any idea on repair costs? The internal damage is always the main worry with a broken timing chain, bent or broken ...
...chain is broken Replace the chain If the existing chain is worn-out so too will the gears be. Use a chain-checker or ruler to measure 'stretch'. If the chain is over 0.75% stretched you will need to ...
Question about Meridian Adult 26-Inch 3-Wheel Bike
...what is the adjustment for this / the problem? Take chain off, look for bent or broken teeth. Check chain grove, look for broken or embedded pieces, clean and oil well. If not, it's motor ...
...broken chain links Lin broke need to replace with newlink Install a chain link connector Have to have at least one there already There is a tool for this. It is available online and called a chain ...
Question about Meridian Adult 26-Inch 3-Wheel Bike
...chain if broken can it damage the engine yes broken timing chain can and will damage an engine do not run vehicle until repair is made broken timing chain Yahoo Video Search Results which make of car ...
Question about Meridian Adult 26-Inch 3-Wheel Bike
...broken timing chain is Serious damage. When you broke the timing chain did you take the cylinder head off and check the valves weren't bent or broken? You will need to get a professional mechanic to ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions