...broken part on the cartridge holder. the broken part, use, is to make sure the cartridge is in absolute contact with the cartridge holder's. the size the said broken part is 2 mm in all sides. so ...
...cartridge holder is broken and I am seeking a replacemnet. I need a source for this part. I had the same problem and just ordered one directly from HP. I called 800-474-6836 gave them my model number ...
...cartridge has broken. As I also have three other Lexmark printers that all seem to have the same cartirdge holders (and potential problem) can I replace the cartridge holder, please? If so how (is it ...
Question about Officejet 7210 All-In-One InkJet Printer
...broken) the printer will never recognize the cartridge. If the printer is still under warranty I would contact HP or an authorized repair center for HP. Both the black and color ink holder has this ...
Question about X2470 All-In-One InkJet Printer
Broken the bottom print cartridge holder - blueish gray The piece that holds the ink cartridge to the carriage allowing it to move and be secured broke when I was changing the ink cartridge this time.
Question about 924 All-in-One InkJet Printer
...for the ink cartridge is broken. Do I the holder for the ink cartridge is broken. Do I need to buy a new printer or can I get a replacement hold? Buy a kodak for 99.00 and the ink is under 5 ...
Question about NP 7130 Black and White Copier
...broken. The cartridge holder hangs down on the left and therefore the copier will not close easily. If forced closed, it still does not print. Is this repairable or should the copier be put in the ...
...cartridge and check that the holder has not broken. When the lever is moved it should squeeze the holder together. If this is all ok then clean the gold contacts in the holder with a damp cotton bud. ...
Question about Photo All-in-One Printer 924 - Multifunction printer / copier / scanner - color - ink-jet - copying up to 17 ppm mono / 12 ppm color - printing up to 20 ppm mono / 16 ppm color - 100 sheets - USB
...broken. The blue (for color) cartridge holder cannot be closed to start printing. The flap is broken. Can it be repaired and how? try holding it down with a bent paper clip, otherwise, without costly ...
Question about Phaser 6125 Laser Printer
...broken part in the cartridge holder and now the color ink cartridge cannot be taken out of the printer, can I fix this problem (DIY) It appears the color ink cartridge cannot be easily inserted or ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions
