Questions & Answers for: broken belt Vacuums

Question about Vision Turbo W/Bonus Upright Vacuum Vacuum

1 Answer

belt pulley is broken I have a dirt devil upright vaccum cleaner. The belt pulley on the motor shaft is broken and missing. So when I put a new belt, the shaft spins without the belt moving, thus ...

Ad

Question about DC07 Bagless Upright Cyclonic Vacuum

1 Answer

belt is not broken. model DC 07; approx three years old The belt may not be broken but after 3 years the belt will have stretched and it will not turn the brush. You should change the belt every year.

Ad

Question about DC07 Bagless Upright Cyclonic Vacuum

1 Answer

...broken belt I have broken the belt on my eureka altima and don't remember how to change it.... help!!! Here is a link to the owners manual which has instructions and a link to the belt you need. ...

Question about DC07 Bagless Upright Cyclonic Vacuum

2 Answers

...belt is broken, stretched or worn. You need to change the belt. You can get replacements here: Replacement Vacuum Belts Sounds simple to say belt is broken. My panasonic beater bar wont turn but belt ...

Question about DC14 Animal Bagless Upright Cyclonic Vacuum

1 Answer

...off and the belt is attached, not broken. The belt doesn't have to be broken to be non-functioning. If the belt is intact but stretched it won't turn the brush. You can get belts here: Dyson DC14 ...

Question about S3606 Bagged Canister Vacuum

1 Answer

...Broken Belt for Hoover Powermax bagged Canister Vacuum is broken. (just purchased unit at thrift store) but can't find belt. (Vacuum discontinued?) Is there a suitable substitute? Your belt number ...

Question about XL Ultra Bagged Upright Vacuum

1 Answer

...work,red light is on says to see owners manual,belt is not broken. The belt may have streached so that when pressure is applied to it the belt slips. The belt will not be broken just streached to

Question about XL Ultra Bagged Upright Vacuum

1 Answer

Broken belt dyson Dc41 Bought dyson dc41 less than 24 hrs. Ago. Already has broken belt. Belt was broken, so I had to go inside the motor assembly -- torx screws all the way. The problem is finding a ...

Question about XL Ultra Bagged Upright Vacuum

2 Answers

...rotate by hand If not CK for Obstruction If so remove screw securing bottom plate Remove broken belt Go to Walmart, Ace or other local stores Match broken belt to new Replace old belt Ttighten ...

Question about DC07 Animal Bagless Upright Cyclonic Vacuum

1 Answer

broken belt. Does my dc07 have a clutch? Dyson vacuum cleaners fans heaters accessories spares official site check and clean the brush bearings located on each end most reasons that belts break is the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...