Questions & Answers for: broiler flame lp conversion

...broiler burner. The conversion kit that came with the stove only had the 4 cooktop spuds. Am I missing something? It's a Kenmore model #790.78531602 Any ideas? Thanks. I just converted mine and the ...

...broiler just doesn't cut it..... Thanks so much, Patricia HI thanks for your question. yes the igniter stays on all the time the flame is on, it keeps the safety valve open to give you gas. and yes ...

...broiler work fine with nice blue flames. My problem is with the bake oven. The flame has to much yellow in the flame. Everything works properly except the bake oven. I have tried adjusting the air ...

...broiler and oven burners, I'm assuming there's adjustment to make there I'm just not sure how much of an adjustment though. I read on another page for converting from ng to lp that you use a 1/2" ...

...Broiler and Oven flames too large and yellow I purchased a new GE gas oven and after the LP conversion, the top burners look fine (blue flame) but both oven burners are mostly large yellow flames. I ...

...LP conversion, The top burners and broiler burner is great with nice blue flames. The oven burner however gets worse as oven heats. I rechecked the orifice hood and tighten until snug in clockwise ...

...flame is pushing off the over-head broiler plate and coming back towards the orifice, so while the broiler is working, it is clearly not working right. The loud noise is the flame coming back on ...

...broiler burner will either fully light for 3-5 seconds, or only partially light 1/2 way through the assembly. On RARE occasion, the oven will light. When it stays lit past 10 seconds, it will remain ...

...LP/Propane conversion kit. All burners and broiler are burning great. The oven, however has large flames that shoot orange out the cover and up the inside walls. Is there another orifice we are ...

...broiler are glowing but not producing a flame, there may be an issue with the ignition system. Check the igniter for any signs of damage or wear. A faulty igniter may not generate enough heat to ...