Questions & Answers for: bridged mode Audio Players & Recorders

...bridged mode. I know it will support loads of 4 Ohms in stero mode but I would like to run a single sub woofer rated at 4 Ohms in bridged mode, giving me the full power from the system. Thanks in ...

bridged mode your amp will become monaural (single channel, double power). If you still wish to bridge it: Switch of power. Set mode switch behind amp to "bridge" position. Connect speaker positive to

...bridged mode? setup of bridge mono mode:-1-turn your amplifier off.2-connect input wiring to channel(1) input--3-connect speaker across positive outputs terminals-do not use negative terminal when ...

How to put dsl-320T in full bridge mode? I have a DSL-320T and need it to run in Full Bridge Mode so that my firewall router (netgear FVS338) can get a public IP address and gateway. I've tried the ...

hi there, i just had telstra install a Cisco 857w router. i am trying to setup the wrieless and am having no luck, i am not very computer literate so i may need to explained in very simple form. ...

D-Link 2000AP+ and 2100AP Bridge configuration We have a bridge network using 2 Access Point D-Link 2000AP+, now one access point is out of order, therefore replaced with a new D-Link 2100AP, but ...

How do I put a siemens speedstream 4200 dsl modem in bridge mode? go to the link below it is all explained step by step ...

...bridged mode ? 1. Use both the Modem and the router as NAT routers. Do this by making your router a DMZ node on your modem, that way ALL traffic will pass to the router, then set up port forwarding ...

...you bridged mode, Dlink appear to have a tool for removing drivers which I see as a very bad sign.This is a pretty old device -  the drivers I'm seeing go back to Windows 98 and Mac

...bridged mono:8 Ohm but the user manual says it supports 4 OHM bridge mode. Anybody knows if it really supports 4 OHM bridge mode? thank you very much. Read the manual! The Bridge mode on stereo ...