...BRIDGE mode you can put each in bridge mode for each side of the stereo system. This means one amp to the speaker on one side, the other amp to the speaker on the other side. NOT ALL amps have bridge ...
wat does the peavey 2600 do in a 2ohm stereo & a 4ohm bridge It burns up...You are allowed no less than 4 ohms stereo or 8 ohms bridge mode.
Question about Europower Pmp5000 Powered Mixer Pmp5000
...bridge mode to work You require a special cable with the Speakon copnnector wired a special way. Refer to your user manual for the correct pin connections to use bridged mode and then put the slide ...
...bridge mode except that it has one. Do I have to rewire a speaker cable or what? Which fader would control the mains? Can I still use the crossover on MONO to feed a sub amp? Yes, in bridge mode you ...
...bridge mode. The mixer was normal during the first 10 minutes, then the mixer shut down and stop working, and now it doesn't even turn on. Then i realized my mistake. Now what can i do? Insufficient ...
How do you switch the behringer 3000 to bridged mode,what settings do you use to get 1200 watts out of it. Well... you probably won't like this, but here is some info: In bridged mode, a different
Question about EUROPOWER EP4000 4,000-Watt Stereo Power Amplifier with ATR
bridge mode. You can do that but your subs will have to be monsters or you will blow them out as bridged mode will drive 2400 watts RMS into 4 ohms. Many speakers are rated in peak or program power...
Question about EUROPOWER EP4000 4,000-Watt Stereo Power Amplifier with ATR
...Bridge Mono mode. Both connectors are strapped together, so either connector can be used with a patch cable to drive the input of another amplifier. Unlike the stereo mode, in which one side of each ...
Question about Pv 2600 Power Amplifier
...Bridge mode? This amp delivers 900W per channel at 4Ohm, you can run a pair paralleled for each channel in a safe way and without the high-risk of your amp being destroyed, besides, amp power at 4Ohm ...
Question about Pv 2600 Power Amplifier
how do you change from 4 to 8 ohm output on a phonic 1860 mixer Stereo and bridged mode selects automatically. Stereo mode gives 4-16 ohms per side. Bridged mode is only from 8-16 ohms. This impedance
Usually answered in minutes!
297 Questions
192 Questions
155 Questions
161 Questions
136 Questions