Questions & Answers for: brakes work pull abs fuse

...brakes work better!!!!! Sensor is **** never had a problem with my Honda's ABS I sent a letter to GM 0 response, never will buy one again!!! How do you know for sure there is no air in the brake ...

brakes work the same. The braking system can work without ABS, provided the ABS isn't the problem. When I hear "shorting out" this means to me something is wrong but the person doesn't know what it is

...will stay on as well. Good luck I don't know a whole lot about abs brakes but I think you have to brake really hard to re-activate the abs system. Hopefully someone else can confirm or correct

...brakes didnt make a difference. but if i pull the abs fuse out it stops pulsating. but with no check engine or abs light coming on i dont no what it could be. could anyone help me on this? pulsates ...

...sensor you can pull the abs fuse under the hood usually large amp fuse 40-60 amp abs wont work put brakes will function better till repaired have vechicle code scan could have bad wheel speed

...pull the abs fuse ,anything that disables the motor will leave you with "old fashioned" brakes. No abs but base brakes will be fine .ABS light will stay on . there is problem with abs unit, check it ...

...BRAKES AND SOMETIMES THEY WILL LOCKUP MEANING HARD PETAL BUT NO STOP....UNLESS I PUMP PEDAL A SECOND TIME. IT HAPPENS COMING TO A STOP SIGN OR EVEN WHEN I TURN THE WHEEL PULLING INTO A PARKING SPOT ...

pull the ABS fuse. I did, and it fixed the braking issues, but I lost braking lights. Why would an ABS fuse be tied into my brake lights? And is there a way around this? that shouldnt be, put the fuse

...brakes work through the abs system normally at all times from the booster and it is only when a wheel stops turning that the electric motor in the abs unit provides pressure to a line to compensate ...

...brakes will work, they just will not have abs function. You could take vehicle into a good shop and have scanned for codes, diagnosed and repair estimate. "I hope this helped you out, if so let me ...