Questions & Answers for: brakes rattle pad change

Ad

Question about 2003 Passat

1 Answer

Brakes Can anyone help with my 03 passat. Just got my brake pads repaired and brake disc's. Sine I got the brake pads repaired the ABS light and brake light is coming on more. There was also a new ...

Ad

Question about 2003 Passat

3 Answers

...brakes it is very easy to hit the sensors, these are a push fit, if they are not fully home the light comes on. simply push the sensors until they click home. On a side issue I have problems with the ...

Ad

...pad retaining pins and anti rattle springs. Remove the brake pads and clean exposed parts of pistons using new brake fluid. Wipe away excess with a lint free cloth. Using a piston clamp, press each ...

Question about 2000 FLHTCUI Electra Glide Ultra Classic

1 Answer

brakes how to change back pads Remove the two bolts that hold the rear caliper into the rear brake caliper bracket and lift caliper out. Pay particular attention to how the brake pads and anti-rattle ...

rattle clips. Position the brake pads to the caliper mounting bracket. With the 2 pads in position, place the caliper over the brake rotor and align the holes in the caliper with those of the mounting

rattle plates to the back of the pads and then reassemble, the same way you did before....Don't open the brake lines or nipples just push the pistons into the cylinders with a convenient lever, so you

Question about 1994 Grand Cherokee

1 Answer

...rattle clip. With the pads installed, position the caliper over the rotor. Before securing the caliper, ensure the brake hose is not twisted, kinked or touching any chassis parts. Lubricate the ...

hello, i have a 94 dodge spirtit with a rattle on the passsengers front side when i go over bumps sometimes its not as bad when brake is applied. try changing your brake pads...brake caliper may have ...

...brakes, rotors, controll arm, pad. What else noise is till there? 150,000 miles also, changed struts anti rattle plates are damaged, remove pads clean rear surface apply thin layer of silicon to pad ...

brakes the rattle comes back. I have taken both front wheels back off and checked all bolts. The caliper bolts are all tight. I am using an impact on the wheel. They are placed back on, tightened then

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85231 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

22663 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...