Questions & Answers for: brake rotor

Ad

Question about 2003 Sierra 2500HD

1 Answer

...brake and i hope its help Rear Brakes JC3 Rotor Discard Thickness* 18.50 mm/0.728 in Rotor Minimum Allowable Thickness After Refinish 19.0 mm/0.748 in Rotor Thickness (new) 20.0 mm/0.787 in Rotor ...

Ad

...brake rotor shield (2K004). CAUTION: Handle front disc brake rotor (1125) and disc brake caliper (2B120) assembly in such a way as to prevent deformation of front disc brake rotor , and nicking, ...

Ad

...brake rotor has been separated from the hub/axle flange, any rust or contaminants should be cleaned from the hub/axle flange and the brake rotor mating surfaces. Failure to do this may result in ...

...brake rotor can be removed without separating the caliper from the mounting bracket. Release the parking brake. Remove 2/3 of the brake fluid from the master cylinder. Raise and support the vehicle. ...

...brake rotor or the brake caliper is lose. I would start by taking the front wheel off and inspecting the brake pads and the rotor. If the brake pads are worn down bad replace them. Pay special ...

...brake rotor, brake pads, brake caliper, caliper mount and brake flex hose. Brake service usual occurs between 20,000 and 40,000 miles depending on driver habits, road conditions and brake pad/ rotor ...

Question about 2006 STS

1 Answer

...brake rotor will have grooves cut in it.always shop for best price at different shops to get a picture of the price for replacement! do not be afraid to ask questions! front brake pads can cost ...

Question about 2004 Grand Cherokee

2 Answers

...brake rotor, an action that causes a vehicle to slow down or stop. If the brake pads are bent, misshapen in any way, or aligned and/or installed abnormally, they can exert abnormal pressure on the ...

Question about 1998 Camry

4 Answers

...brake rotor that is not able to receive the stress from braking, simply, the rotor if grooved or warn will vibrate from the brake pads,,,,,,,,smoothe surface (brake pads) grabbimg the grooved rotor ...

Question about 2002 Yukon Denali

1 Answer

...brake rotor has been separated from the wheel bearing flange, clean any rust or foreign material from the mating surface of the rotor and flange with the J42450 hub cleaning kit. Failure to do this ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

23438 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...