brake lights not working Have the shop try to break switch under the pedal. That was what my problem was when the break lights went out on my 06 Tucson, I am looking into this same problem for my 2005
hyundai tucson 2006 2l diesel. how much for parts and how difficult to install? Not really sure on parts pricing (probably very expensive) but very complicated and work intensive to install... Need to
sends the signal to this dash light. Try working the emergency brake up and down to free the relay. If this doesn't work you should probably have it replaced. (should be covered under factory warranty
abs light on constently on 2005 tucson Hi, changed my brakes front and rear and since my abs light as been on. Well comes on atfer maybe 100 to 200 meters of driving when car is started. Before light ...
all brake lights are not working. is it a fuse? it may be or it could be the brake light switch on the steering column but check the fuse first
...your truck it has sperate lights for signal and brake, the converter converts this into one light for the trailer, so just replace the converter and everything should work fine, hope this
...brake lights are not working on my 2008 Hyundai Elantra. Check fuses, bulbs, wires and brake switch (back side peddal). Keep us updated. The most widespread Hyundai recall, affecting up to 531,894 ...
...are MISSING DETAIL.... oooopsie... Light BOLTS = Light BULBS?? Are you asking about brake LIGHTS? If so check the brake light switch at the pedal,. the fuse boxes are under the hood. Best regards ...
...brake lights. Fuses are good. no power to break lights when break peddal is depresed. The most widespread Hyundai recall, affecting up to 531,894 2005-2008 Accent, Azera, Elantra, Entourage, ...
2006 Hyundai Tucson brake lights Back lights not working 1 check you fuse if not that then check the bulbs in each light
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions