Questions & Answers for: brake light switch hyundai accent

...brake light( what a fraud) and change my burned brake light so i told them to only change my brake light .Soon after the brk light was replaced my parking stick was no longer stock on parking but i ...

Ad

Question about 2003 Accent

1 Answer

...brake light dont work fuse are good , bulbs blow out,I reset the override switch at shifth control Go to www.hmaservice.com and register( Vehicle by VIN). Afterward, you have access to shop manuals, ...

Ad

2005 hyundai accent brake light doesent work CHECK THE BRAKE LIGHT SWITCH FUSE.IF ALL IS GOOD.YOU HAVE FAULTY BRAKE LIGHT SWITCH.

Question about 2005 Accent

2 Answers

brake switch (back side peddal). Keep us updated. The most widespread Hyundai recall, affecting up to 531,894 2005-2008 Accent, Azera, Elantra, Entourage, Santa Fe, Sonata, Tucson, and Veracruz models

Question about 2005 Accent

1 Answer

...light switch. Most are mounted on or near the hinge point of the brake pedal under the dash. Shouldn't be difficult to replace. If you want, you can purchase a vehicle specific repair manual at your ...

Question about 2005 Accent

1 Answer

...some one look at the brake lights on the back if they dont come on its the brake light saftey switch under the dash it connects to the brake pedal it cost like 18 bucks cheap fix i had the same ...

SAFERCAR.GOV Check for power at the brake switch, into it and out of it. If there is power in and none out then the switch is faulty. if there is none at the switch then there is a fault in the wiring

...brake light switch broke off (or got knocked loose) so maybe there is some kind of wiring issue now that is preventing the car from starting. I took the fuse out for the brake lights so the lights ...

brake light stays on when 2005 Hyundai accent not running When car is turned off brake light stays on and drains battery A mechanic would check to see if the brake light switch is working correctly.

2005 Hundai brake light will not turn off You need adjust the brake pedal with the switch, is possible to be too tight, need to loose it a little, if not, just change it, is easy.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...