Questions & Answers for: Ford Ranger brake

Question about 1999 Ranger SuperCab

1 Answer

no emegency brakes How do I get the slack out of the emergency brake cable. Everything has been replaced from pedal to rear brakes Hmmm, tricky one. I would say that this is rear drum brakes and that ...

Ad

Question about 1998 Ranger SuperCab

1 Answer

How do i bleed my brakes for my 1998 Ford Ranger? When i push the brake pedal it goes all the way to the floor. First I would figure out why it needs to be bled, if it was leaking somewhere, or fluid ...

Ad

Question about 1990 Ranger SuperCab

3 Answers

Brake problem I think there is a problem with my brakes. I drive and it feels like the brakes are on. Im not pressing on the brake and when i let go of the gas it slows down as if Im braking. My ...

ford ranger back brakes locked up? what can cause this? If NOT PARK BRAKE & / or Cables , THE BRAKE HOSE (RUBBER) from body to Axel can Fail on the INSIDE in a Way that it HOLDS Brake Fluid IN the

CHANGED EMERGENCY BRAKE CABLE ON 1998 FORD RANGER NOW BRAKE PEDAL DONT COME UP ENOUGH TO TURN BRAKE LIGHT OFF ON DASH. CABLE HAS NO ADJUSTMENT. change brake switch. my son just changed my brakes and ...

need a full brake line diagram for 1992 ford no fluid going to rear brakes Too many variables here. Is there fluid in the master cylinder in the rear brake portion? Does a brake warning light come on ...

Question about 1990 Ranger SuperCab

2 Answers

Having trouble with the brakes on my '90 Ford ranger. Replaced the master cylinder and still have very little braking power. Any help would be appreciated! ***Seek out professional help this vehicle ...

I have a 92 ranger, 4l v6 2wd and have had problems with my brakes since i used the park brake at the boat launch...the rear brake on the drivers side was dragging and getting very hot, eventually ...

Question about 1993 Ranger SuperCab

1 Answer

the brake cylinder in the rear drum of a 93 ford ranger broke, how do i replace it Remove wheel, brake drum, and brake shoes. The cylinder is the part the brake line goes into and it spreads the brake

Question about 1998 Ranger SuperCab

1 Answer

how to installing brake shoes on back ? First you have to compress the parking brake cable spring and attach the parking brake lever. Clean and lubricate the brake backing plate. Use silicon Brake ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...