...Bose speakers. The stereo turns on, but the sound does not come out. What do I need to do? Tell your son not to play with your stereo. Sorry that was a bit blunt. The Speakers from a bose system ...
...for bose 901 direct/reflecting speaker system http://www.bose.com/pdf/customer_service/owners/og_901.pdf How do I connect my bose 901 to a Rotel RC 1070 pre amp and the Rotel RS1090 main
...main in? A few particular models would help stear me in the right direction. Integrated, bridgable? I have no clue. I was told to get at least a 100 to 150w 2ch amp? If possible to through in, what ...
Question about 901 VI Main / Stereo Speaker
...Bose model 141 shelf speakers fisher ws-c424 center speaker realistic 12 in. sub woofer i realize i have to buy the equalizer for the 901's but the manual states i have to have a separate amplifier ...
Question about 901 VI Main / Stereo Speaker
Can I hook up my Bose 901s to a Technics Receiver Model SA-DX930? I don't see why not.. just make sure you observe polarity.. red to red+++ black to black---
Question about 901 VI Main / Stereo Speaker
...bose 901 speakers with an onkyo 100 watt amp. the amp is going out i think what is a good replacement? My $.02: anything strong and clean. I'm partial to Carver amps and have run mine with double ...
Question about 901 VI Main / Stereo Speaker
...bose 901 series VI will work? It will work, but theoretically less than 100% optimally as far as frequency balance; it would be a whole lot better than not having one at all. Now, if you're ...
bose 901's and was wondering what system would provide enough power but still cheap and mp3 compatable??? Keeping in mind that the 901's and multichannel recievers won't work unless you use an
Question about 901 VI Main / Stereo Speaker
BOSE SPEAKERS?? For stereo only, anything pushing a good 100 watts (for real). I use a Carver MT-200. If you want to use it in a mulitchannel home theatre setup you'll have to have a dedicated amp for
model # its in another town). The main thing for bose 901's is that the equlizer has to be connected somewhere beteen the preamp and the main amp, most higher power amps have a switch that opens a set
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions