...rear legs are not adjustable. A slight shaking of the machine while unplugged can make it shake more during the spin. You don't anchor machines nor over-load them. A well adjusted washer never
...Bosch washer seems out of balance when spinning, even with no load. With a small load, it seems worse. The washer is only a few months old, but had to be torn apart and rebuilt because a ...
...washer spins, but leaves clothes wet & drippy, plus shakes so had the front plastic panel on door Fell OFF...Just went out of warrenty...mostly a piece of **** since I purchased!! Frustrated!! if it ...
walking shaking every spin cycle No matter what everytime we wash when the spin cycle happens the machine walks and shakes and we have to sit and open the door adjust the clothes and never able to ...
Question about Nexxt Premium WFMC6400UC Front Load Washer
...washer shakes My new washer shakes while spinning. A service man told me to check and make sure the shipping staps had been removed from the back of the washer (inside a panel). I opened the panel, ...
...Bosch HJA 8552 (fitted kichen reference). When it spins it sounds like it will shake to pieces, Have checked feet, taken top and back off but nothing obvious, Thought spring or 'dampeners' may have ...
...Bosch stackable washer shakes violently while spinning. It was installed by my husband. He has tried adjusting the legs but it hasn't helped. Look in your manual for the 'transit bolts' removal. ...
Just bought the Bosche Axxis front loader. When the spin cycle kicks in, the machine wobbles/shakes/wanders VIOLENTLY from side to side. Is it the installation or the machine? It is an installation ...
Question about Axxis WFL 2060 Front Load Washer
...shakes/wanders VIOLENTLY from side to side. Is it the installation or the machine? I bought the Bosch 8Kg washing machine on 8th Feb, I had the same problem. Read installation instructions, you need ...
washer is shaking while spining Just from what you stated .If your cloaths are unbalanced it will wobble while in spin cycle,if its not unbalanced, Probily a broken spring,these units use 3-4 springs
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions
