Questions & Answers for: Jeep Cherokee bolt torque

Question about 1991 Cherokee Briarwood

1 Answer

...6 10 14 | ------------------ Final torque must be reached in 3 equal steps Step 1: torque all bolts (except bolt 11) to 110 Ft/Lbs Step 2: torque bolt 11 to 100 Ft/Lbs Recheck final torque in ...

Ad

...torque bolt 11 to 100 Ft/Lbs Recheck final torque in sequence. Disconnect the negative battery cable. Drain the cooling system. Disconnect the hoses at the thermostat housing. Properly relieve the ...

Ad

...bolt No.11 will be tightened to a lower torque than the rest of the bolts. DO NOT over tighten bolt No.11. Tighten all bolts in sequence (1 through 14) to 22 ft. lbs. (30 Nm). Tighten all bolts in ...

...set to 61 Nm (45 ft. lbs.) torque. Tighten bolts in sequence: Bolts l through 10 to 149 Nm (110 ft. lbs.) torque. Bolt 11 to 13 Nm (100 ft. lbs.) torque. Bolts 12 through 14 to 149 Nm (110 ft. lbs.)

...torque specs for a 2001 jeep cherokee intake manifold Intake manifold using new gaskets. Torque the bolts, in sequence, to 105 inch lbs. (12 Nm)... Fig. Intake manifold torque sequence-3.7 & 4.7L ...

Question about 1990 Cherokee Limited

1 Answer

...bolt torque specs on a 1990 jeep 4.0 Tighten all bolts in sequence (1 through 14) to 30 N·m (22 ft. lbs.) torque. Tighten all bolts in sequence (1 through 14) to 61 N·m (45 ft. ...

...torque procedure. Bolt #11 threads must be coated with loctite 592 sealant before installation Tighten all bolts in order to 22 Ft/Lbs. Tighten all bolts in order to 45 Ft/Lbs ReTighten all bolts in ...

Question about 1998 Cherokee

1 Answer

...bolt torque is as follows: 1. Tighten all bolt in the sequence shown in the image below to 22 ft. lbs. 2. Tighten all bolt in the sequence shown in the image below to 45 ft. lbs. 3. Check all bolt to ...

Question about 1998 Cherokee

1 Answer

...all bolts, nuts, machined holes with thread need to cleaned and resized the threads. To torque any bolt will need to oiled--not much.... I hope this helps you and I wish lot of luck. ...

...torque sequence of the head bolts on a 1999 Jeep Cherokee 4.0? Head bolt pattern 4.0 - Jeep Cherokee Forum https://www.cherokeeforum.com > head-bolt-pattern-4-... Apr 12, 2017 - step 4...tighten all ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1998 Jeep Cherokee
1998 Jeep Cherokee

1,380 Questions

1999 Jeep Cherokee
1999 Jeep Cherokee

1,162 Questions

1995 Jeep Cherokee
1995 Jeep Cherokee

698 Questions

2000 Jeep Cherokee
2000 Jeep Cherokee

672 Questions

2001 Jeep Cherokee
2001 Jeep Cherokee

659 Questions

Manuals & User Guides

Loading...