Questions & Answers for: bolt remover

...IT ASIDE.REMOVE THE LOWER RADIATOR CROSSMEMBER SUPPORT.LOOSEN BUT DO NOT REMOVE.ADJUSTING T BOLT AND THE PIVOT BOLT.LOOSEN DRIVE BELT ADJUSTING BOLT.REMOVE OR DISCONNECT THE FOLLOWING.DRIVE ...

Ad

Question about 1999 Ranger SuperCab

1 Answer

...Drain the cooling system. Disconnect the three way catalytic converter Loosen the water pump pulley bolts. Remove the drive belt. Remove the water pump pulley, fan and clutch assembly. Remove the ...

Ad

Question about 1994 Caravan

1 Answer

...the air conditioning compressor drive belt, if equipped. Loosen the alternator adjusting bracket bolt and adjusting bolt. Remove the alternator belt. Remove the bracket and mounting bolts. Remove ...

...container and retighten radiator drain plug. Remove upper radiator hose. Remove fan clutch assembly bolts. Remove 5 cooling fan shroud bolts. Remove fan shroud and fan as an assembly. Loosen ...

Question about 2007 Ram 3500 Quad Cab Laramie

2 Answers

I HAVE A 2007 2500 DODGE RAM WITH 5.9 CUMMINS AND AUTOMATIC. CAN I LOOSEN THE MOTOR MOUNTS AND LIFT THE ENGINE ENOUGH TO REPLACE THE OIL PAN? depends on whether you have 2WD or 4WD. The manual says if

Question about 2007 Ram 3500 Quad Cab Laramie

2 Answers

i broke the crankshaft bolt what do i do? ok witch bolt is it. On most tuff bolts that I break trying to remove or install I use a left hand drill bit and then if that does not catch and remove I use ...

...FAN - REMOVAL). Remove the wiring harness clip from front mount. Remove the coolant line clamp bolt (COOLANT LINE BRACKET). Remove the upper nut from the front mount (FRONT RUBBER MOUNT UPPER

Question about 2004 Pacifica

1 Answer

how to remove oil pan 2003 4x4 1. Open the hood. 2. Disconnect the battery negative cables. 3. Remove the intake air assembly. 4. Remove the radiator shroud retaining bolts. 5. Install engine support ...

... Disconnect alternator field circuit plug. Remove B+ terminal nut and wire. Remove 2 lower mounting bolts. Remove alternator. To install: Install alternator. Install upper bolt mounting bolt. Install ...

I. Need. Help. With. Cam bolts. And head bolts Part 1 of 3: Getting to the head bolts Materials Needed Eye protection Gloves Oil and coolant drain Parts cleaner or brake cleaner Shop rags Socket set ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...