Questions & Answers for: Kia Sportage bolt

...for your a/c belt then your p/s belt loosens from the power steering pump pulley just turn the bolt counter clockwise and itll come off thats how my 99 works http://www.kiatechinfo.com/index.asp ...

FOR FIXING THE CRANK SHAFT PULLY WHICH BOLT IS FIX SMALL OR BIG I FOUND THE PULLY FIXED WHITH THE SIX SMALL BOLTS ONLY AND THE MAIN BIG BOLT NOT FIX THE PULLY ITIS ONLY PASS THROUGH THE PULLY AND ...

i nead torque wrench setting for head bolts and cam bolts for kia sportage 1998 twin cam 16valve 20ltr dohc Head bolts- 62 lb-ft cam pulley lock bolt- 42 lb-ft cam cap bolt- 16 lb-ft Can anyone help ...

...cleaner inlet pipe. Disconnect alternator electrical connections. Loosen (but do not remove) pivot bolt and tensioner mounting bolt. Remove drive belt form alternator pulley. Remove tensioner ...

Below are the steps.. Disconnect the negative battery cable. Remove the two fresh air duct mounting bolts on the radiator. Loosen the fresh air duct clamp at the intake housing. Remove the hose at the

...oil. Remove or disconnect the following: Negative battery cable 2 Top intake manifold bracket bolts Front 3 axle housing mounting bolts, 4WD only Left front bushing from the axle housing mount ...

how do replace the alternator belt on a kia 2002 sportage There is a log bolt that needs to be loosened,but the bolt on the back ,top of the alternator has to be loosened first,then turn the long ...

...until timing mark on front housing and the arrow "2" on the camshaft pulley align. Loosen lock bolt on tensioner. Pry tensioner away from timing belt and tighten lock bolt to relieve tension on ...

...container and retighten radiator drain plug. Remove upper radiator hose. Remove fan clutch assembly bolts. Remove 5 cooling fan shroud bolts. Remove fan shroud and fan as an assembly. Loosen ...

...resservior tank hose, fresh air duct remove engine fan and shroud together loosen altenatormounting bolt and adjustment bolt remove altenator belt and fan pully, remove the 3 fan brakett assembly ...