...body that detects when the top cover it open (even partially), and the printer won't work in this condition. To fix this, open the top cover and carefully disconnect the 3 wire harnesses and the ...
Question about X2500 All-In-One Printer
...Usually that is a sign of an object in between the rollers. Check for paper or other foreign body. It will be located on the side that dragged. Good Luck! Tinteiros
...you carefully remove the whole cover undo the 4 screws and gently prise the locating tabs away from body disconnect the small multiplug thing and the digital strip thing they come out easy but gently ...
...body that detects when the top cover it open (even partially), and the printer won't work in this condition. To fix this, open the top cover and carefully disconnect the 3 wire harnesses and the ...
...body that detects when the top cover it open (even partially), and the printer won't work in this condition.To fix this, open the top cover and carefully disconnect the 3 wire harnesses and the ...
...body that detects when the top cover it open (even partially), and the printer won't work in this condition. To fix this, open the top cover and carefully disconnect the 3 wire harnesses and the ...
...jam. The paper can barely be seen when looking down into the paper feed. Paper cannot be seen from the front where paper comes out. The paper is apparently folded very tightly in the feed. I tried ...
...body that detects when the top cover it open (even partially), and the printer won't work in this condition. To fix this, open the top cover and carefully disconnect the 3 wire harnesses and the ...
Question about X8350 All-In-One InkJet Printer
...jam sensor switch arm has dislodged from the bracket how do you get it back in Peter Smith: You'll have to open the body of the machine, (it's pretty tricky so pay attention to how the ...
Usually answered in minutes!
1,487 Questions
1,353 Questions
1,277 Questions
961 Questions
741 Questions