Questions & Answers for: bobbin thread

Ad

Question about Office Equipment & Supplies

1 Answer

...bobbin thread-- Step 1--Secure thread on sewing machine as if you were threading machine and pass thread end along indicated thread guides. Thread guides will be somewhat different for bobbin winding ...

Ad

Question about Shark 60 - 384

1 Answer

...needle thread will pass down into the machine and catch a loop of the bobbin thread. Pull this loop up and slide both threads to the back before beginning to sew. Good Luck!! Thanks for using

Ad

Question about 5050 Mechanical Sewing Machine

2 Answers

bobbin thread is taken up too much It is the upper thread which pulls the bobbin thread up. If the bobbin thread is taken up to much, one solution is to loosen the upper thread -- but the upper thread

Question about 5050 Mechanical Sewing Machine

1 Answer

thread a bobbin on a 5825c If you mean the Singer 5285C, the manual is available from Singer here: http://www.singerco.com/uploads/download/449_5_6_8_10_slide.pdf . The diagram for winding the bobbin ...

Question about 7469Q - Confidence Quilter Machine

1 Answer

...thread. Drop the bobbin into the bobbin case. Pull the thread into the slot just to the left of the bottom center (6 o'clock on a 12-hour analog clock), of the bobbin case. Place a finger on top of ...

Question about 7469Q - Confidence Quilter Machine

1 Answer

...bobbin thread breaks too much. How do I fix it. Be sure you are using the correct bobbin for your machine. Even though it appears to fit the bobbin case, if it is the wrong bobbin, it could cause ...

Question about 7469Q - Confidence Quilter Machine

1 Answer

...bobbin thread spool pin. Move the bobbin thread spool pin up as far as possible. 1-Bobbin thread spool pin 4. Place the bobbin on the bobbin winder shaft so that the spring on the shaft fits into the ...

Question about 7469Q - Confidence Quilter Machine

1 Answer

...bobbin thread around the case and into the notch near the front of the bobbin case. Continue to pull the thread lightly around to the second notch. Leave about 6" of thread out past the second notch. ...

bobbin thread stitches get pulled up to top of fabric. How do I adjust tension to fix this problem? Bobbin thread showing on top side means the top thread tension is too high or there is too little or

Question about 7469Q - Confidence Quilter Machine

1 Answer

...bobbin thread is captured by the bobbin tension spring when you load bobbin into machine. Use your left hand to position bobbin thread per machine instructions. Press on the bobbin with right index ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

Ekse

Level 3 Expert

13435 Answers

The Knight
The Knight

Level 3 Expert

76791 Answers

Brad Brown

Level 3 Expert

18822 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...