Questions & Answers for: bobbin tension adjustment brother xl

...tension seems to be adjusted wrong. The bobbin thread comes to the top and I have tried to adjust the tension and nothing seems to work. What should I try next? I AM NOT SURE BUT TRY TO ADJ. THE ...

...bobbin case tension ,the little screw on the bobbin case. with bobbin in case hang by thread if it drops easy tension is to light cotton should be able to slightly move through the case. hope this ...

bobbin tension should have 1/4 - 3/4 ounce of drag. The thread should JUST be able to hang the bobbin without it sliding down the thread. If it slides, it's too loose. If you need to pull it down with

How do I adjust the tension on my brother xl-2620 Rotate the tension dial (which is the dial furthest to the left) right or left to adjust the tension.

...the lower tention,turn small screw on tension spring of bobbin case with small screwdriver.to increase tension turn clockwise very slightly .to decrese tention turn counter clockwise.very ...

bobbin tension The bobbin tension is messed up. How do I get it adjusted right? try this link for a free manual and see if it helps with bobbin tension ...

...bobbin tension model xl 5130 to adjust the bobbin use the top tensionalso try rethreading the machine top, using every thread guide & bobbin making sure to insert the bobbin correctly into ...

tension settings on the brother XL 2620 I cannot seem to get the correct stitch tension on this machine and dont have an instruction book,what are the normal settings for straight stiching.IE Quilting

...the same. What do I do? I have a project due in 7days please help! Hi you bobbin case has a screw. a small flat head screw tighten it slightly this should help the screw is also a tension ...

...tension on the bobbin. It is the screw nearest to the thread exit hole on the side. 3. Put it back in. 4. Now, the top tension should be at about three. If it still allows a little wad on the bottom ...