Questions & Answers for: Euro-Pro bobbin tangled

...felted sweaters and suddenly my machine stopped working. It is making huge birdsnests around the bobbin mechanism and jamming to the point where I have to cut the whole piece free from the

bobbin thread was tangled. I pulled out the bobbin case and removed the tangled thread from within. When I am trying to start sewing again, I cannot be able to draw the thread from the bobbin. This is

...tangled in the bobbin This is my first time using a sewing machine, so please bear with me if this is an easy fix. I can stitch about an inch of material before the needle gets stuck. When I remove ...

...problems I have a euro pro 385w sewing machine and when I try to sew it tangles my thread up at the bobbin and it pulls the material in there to. My feed lever doesn't move up and down like it is ...

My bobbin isnt winding correctly when im winding my bobbin it keeps getting tangle..it wont wind smoothly. re-thread sewing machine for bobbin winding. There should be a screw looking thing that holds

...? I have tried to use it by putting a piece of cardboard over it but it still gets tangled. I am going to order a cover for the bobbin case. Wise not to use it until you have the proper slide ...

...thread , the problem is once we start to sew it moves a little then stops thread tangles on bobbin and breaks from top. we try different ways of threading Check that the thread is tight

or bottom. EP 382 have you tried another bobbin? when was the last time the machine was serviced? The top thread gets tangled in the bobbin housing as soon as I start stitching.How should I clear this

...tangled up in the bobbin area.. I have taken the bobbin casing out several times and put it all back together. The needle does not catch the bobbin thread. If it does, I pull it through and do a test ...

bobbin keeps tangling with to thread re-loading bobbin Have you checked your tension? And is your needle an old one, or bent or blunt? Are you sure it is threaded correctly? Is it the same thread in ...