Questions & Answers for: Kenmore bobbin cover

Ad

Question about Drop-In Bobbin 16231 Mechanical Sewing Machine

1 Answer

...cover that snaps over the bobbin i have a kenmore drop in bobbin 16221, and the clear plastic cover that snaps in over the bobbin went missing. what is that piece called so i can order a new one? ...

Ad

Question about Drop-In Bobbin 16231 Mechanical Sewing Machine

1 Answer

...UNDER TOP COVER & CHANGED PART #1939 RUBBER BOBBIN WINDER RING SINCE RUBBER RING LOOKED WORN OUT, BUT STILL WON'T WIND. MACHINE MAKES SPINNING SOUND BUT DOESN'T WIND. bobbin wont wind on sewing ...

Ad

Question about Drop-In Bobbin 16231 Mechanical Sewing Machine

2 Answers

thread jamming up around the bobbin I just sewed 2 covers and as I try to start my 3rd, the thread bunches up around the bobbin, jamming the whole thing up. What am I doing wrong? Sounds like your ...

Question about Drop-In Bobbin 16231 Mechanical Sewing Machine

1 Answer

...I sew two or three stitches and the machine stops. It sounds like it is stuck. I have taken out the bobbin and it doesn't look like anything is stuck? Get out the manual and start with maintenance so ...

Question about Drop-In Bobbin 16231 Mechanical Sewing Machine

1 Answer

Where to buy a bobbin screen? I'm gussing you mean you mean the "hook plate" that covers the bobbin? Go to Sears.com and check out the repair section. You should be able to order parts from there. ...

Question about Drop-In Bobbin 16231 Mechanical Sewing Machine

1 Answer

...bobbin. If it is screwed in place, use a screwdriver. If it is held by a clip or magnet, use a small flathead screwdriver to pry up the plate. 3 Thoroughly clean inside all the openings, using a ...

Question about Drop-In Bobbin 16231 Mechanical Sewing Machine

1 Answer

bobbin cover to go back on bobbin holder is too high to close cover over it try a different bobbin, make sure the bobbin is seated correctly in bobbin case,,take a can of air & use it on

Question about Drop-In Bobbin 16231 Mechanical Sewing Machine

1 Answer

bobbin cover will not close bobbin is too high to close cover if the bobbin cover won't fit easily over the bobbin the either it's the wrong bobbin for the machine, the bobbin is warped or ...

Question about Drop-In Bobbin 16231 Mechanical Sewing Machine

1 Answer

...bobbin winder ring, oiled everything, took the clutch cover off, cleaned and oiled, and screwed back on. Watched a couple fix-it videos about bobbin problems. Still no luck. Ready to sew curtains, ...

Question about Drop-In Bobbin 16231 Mechanical Sewing Machine

1 Answer

cover and wind the bobbin fine. Once I press the bobbin Winder Reset button down, it will stay. But next attempt to wind a bobbin will not disengage it (or flip up the reset button. there is a part In

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Kenmore Sewing Machine Experts

Kelley Buchanan
Kelley Buchanan

Level 2 Expert

130 Answers

Irene Tulloch

Level 2 Expert

498 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

222 Answers

Are you a Kenmore Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...