Questions & Answers for: bmw dials not working

Dash controls not illuminating My dash lights are not working and it is not the fuses. What could it be? There is a dial on the left side next to the steering column, rotate the dial upwards, if that ...

Fuel Consumption Dial Reading I will be grateful if you can help me read and understand the Fuel Consumption Dial. At what point is fuel being used efficiently. Hi, The meter works with the rpm and ...

bmw radio in '95 325 works 5 to 10 min.,then fades out completly The radio in my 1995 BMW 325 works for about 5 to 10 minutes, then sound fades out completely (the station light on the dial stays on).

...dials have stopped working on my bmw 316i compact 2000 w reg. Any ideas please? The digital miles are still showing. If your temp and fuel gauges are playing up then check ALL the fuses under the ...

Dash Probs I have a P reg 318is coupe and my petrol gauge doesn't work either. Every now and again, all dials on dash except speedo cut off then come back on again? This doesn't affect anything else. ...

Fuel gauge dial and Temperature gauge dial both not working. My fuel gauge is showing empty even though there is a full tank and my temperature gauge isn't working either. Could this be the electric's

bmw e30, mpg and rev counter not working. all other dials do work though. service lights can be and have been reset. Have you removed the instrument cluster to check/replace the batteries on the ...

...voice dial radio doesn't shut off To whom it may concern, I have a Parrot CK3000 (v5.10C) in my BMW and it is set to connect with a Blackberry Curve 8310 and work well. Recently it has started to ...

i have a 328i convertible 1996. i bougth a hardtop, but i can not find the swich fot the wiring for defrost rear window and interior lights....if youcan help me...thanks when you push the defrost ...

...BMW Dash bords still use old light style technology and did not at the time start using an LED contented directly to the bored... There could either be a blown globe or a loose connection at the back ...