Questions & Answers for: Philips blue led

BLUE LED COMES ON. THE RELAY CLICKS 2X THEN THE BLUE LED GOES OUT WITH A CLICK OF THE RELAY AND THE RED LED FLASHED AGAIN 1X ALSO WITH A RELAY CLICK. NOTHING ELSE HAPPENS. I TRIED A POWER SUPPLY BOARD

...back in if the set displays a white, blue et c screen replace the SSB. If not and on the logic board you don't have 1 solid blue led and 1 blinking led data is not flowing and change the logic

...blue led light on TV went out while watching. Called Philips customer support but out of warranty. They said to update firmware; if that doesn't work then out of luck. After unplugging over night the ...

...blue led at the bottom and a blank black screen with no sound, when i change the channel the blue led goes out for 5seconds and the screen flashes for a nano second them the blue led comes back on. ...

...red and off..) Now the tv led stay blue always but clicking every 20 seconds and nothing on the screen... Sir try to check this link http://www.fixya.com/support/t10557762-just_change_main good

...blue LED on light is lit). I powered off the TV, also at the mains for about 2 hours, no luck. I am still experiencing the same problem. Please advise what the issue could be along with a possible ...

Blue on screen Check and replace its tuner. Blue-screen denotes no signal. Electro help

blue light flashes on power button just put a new projection bulb in it These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an

...blue lite off if I wait 10 or 12 seconds. Backlight LED lamps are bad, replace the strip and also replace the two 47mfd @ 100V capacitors to 100MFD@100V in the LED driver section of the power ...

blue LED backlighting is found on the majority of flat-panel LCD TVs. LED lighting is brilliant, small, and energy efficient, but it has a cool color temperature that gives it a little blue tint. When