Questions & Answers for: LaCie blue led

Question about Electron III 22" CRT Monitor

1 Answer

...blue III 22" CRT it keeps turning off by itself intermittent, power LED goes amber and flash i have to turn it off and back on again. Could someone help please. Sounds like this one needs ...

Ad

Question about 1 TB 2big Spare Drive 301307 SATA Hard Drive

1 Answer

...LED's are continuously flashing red/blue which according to the Lacie manual indicates a drive failure. I reinserted it to make sure it was plugged in properly and it is still flashing ... any help ...

Ad

Question about Electron III 22" CRT Monitor

1 Answer

...blue III 22" CRT it keeps turning off by itself intermittent, power LED goes amber and flash i have to turn it off and back on again. Could someone help please. I have a LaCie 22 Blue 22" CRT. It ...

Question about d2 Extreme 250GB External with Triple Interface USB 2.0/Firewire 400/800 - 300790U ... Hard Drive

1 Answer

...blue led, is there anyway to hard reset the drive, is there a fuse in the unit that might have blown? Any ideas? have you checked the output on the power adapter when you plugged in? if not, there is ...

Question about (301082U) 250 GB Hard Drive Array

1 Answer

Help!! If the drive front LED alternates between Red and Blue, whilst the rear LEDs are normal, then it is a tempertaure warning. Ensure that there is plenty of space around the drive and at the rear

Question about 2 TB 2big Triple Interface External 301256U FireWire 400 Hard Drive

1 Answer

...LED ? solid blue Rear LEDs ? solid blueNOTE: If a disk is failing, both the disk?s corresponding rear LED and the front LED will be solid red. During RAID Synchronization Front LED ? solid red Rear ...

Question about 2TB 2BIG QUADRA RAID EXT ESATA FW800 USB 2.0 RAID 0/1/JBOD

1 Answer

...purchase (August 2010). Serial number: 5102001839. Disk 2 does not work. At the front, light blinks blue for 3 seconds, and red for half a second. At the back, on AUTO mode, on the left, Drive Status ...

Question about Big Disk External USB 2.0 1TB Hard Drive

1 Answer

blue LED of the power button starts to flicker and then release the button. -Then, after 1 or 2 seconds the button's LED should flicker with another rhythm. -Push the button again. After a few seconds

Question about 2TB Network Space 2 A)

1 Answer

...blue led intermittent does read and write indication. enter ip addy of unit and addressbar returns dashboard grey background with whitespace for all info and links but whitespace is total blank. ...

Question about 4TB Biggest Quadra U SATA II Hard Drive

1 Answer

...blue led light on the back of the drive is blinking, all the other drives have solid blue light Could be defective. Try swapping power cord and usb cable with know good ones. You could also plug it ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top LaCie Computer and Internet Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Paul Bade

Level 3 Expert

1818 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

Are you a LaCie Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...