...BLUE LED will turn on. I tried unplugging the tv for acouple of minutes and then plugging it back in but no luck. Any help is welcome. I had a similar problem and it was caused by my cable box being ...
Question about 53UWX10B 53" Rear Projection Television
LED not lit on deflection board no picture on tv problem started with blue convergence not lining up. replaced red and blue ics and RK50 and RK54 resistors for hitachi 53uwx10ba. connected and powered
Hitachi 46510 blue screen-Shuts down I have a Hitachi 46F510. When I turn the set on, the screen is blue and you can faintly see a picture, then it shuts itself off anywhere from 30 seconds to a ...
Question about 42V715 Rear Projection Television
...but then power led keeps blinking, twice a second..screen turns faint blue...no signal. What could be the cause? Hi, usually an indication the lamp has failed, replace in last 2 years??? ...
Question about P50H401 50 in. Plasma HDTV
...blue led flashes Was watching and a load pop noise then no picture or audio. blue led flashes four times and then repeats. sound like mine,the two power clips have gone,midle panel to left,need ...
Question about 60VS810 60" Rear Projection HDTV-Ready Television
...blue led that flashes, and when the blue led turns solid, the screen picture appears. My problem now is that the blue led always flashes and the picture never appears. What is that telling me?? It ...
...TV, when I turn it on, the power blue LED comes on and then after a couple seconds, the TEMP and LAMP led start flashing red. No sound or display. Manual indicates lamp or cooling fan
...blue led power light there is a red led light on and next to it says lamp. Does this mean my lamp has gone out? jayden2115, Your lamp assembly needs replaced. See my tip at ...
Question about 32" LE32T05A Full HD LED- LCD MultisystemTV FOR 110-220 VOLTS
led blue light blinking but screen is dead power light is blinking but tv not starting Maybe your tv is asleep or snoozing. wake it up.
Question about 32" LE32T05A Full HD LED- LCD MultisystemTV FOR 110-220 VOLTS
SCREEN IS DEAD BUT POWER LIGHT IS BLINKING BLUE Led blue light blinking but screen is dead Check your backlight. It may have burnt out. Easy solution is to get a new tv.
Usually answered in minutes!
727 Questions
631 Questions
405 Questions
415 Questions
357 Questions