Questions & Answers for: Xerox Phaser blue in corner

XEROX PHASER 8550 THIS PRINTER ALMOST NEW IT HAS ONLY 10,743 PAGE COUNT. PROBLEM: WILL NOT PRINT BLUE COLOUR IT PRINTS RED, YeLLOW, and Black ..Prints Blue like light green... now remember this ...

Phaser 8200 color "blues" I am having a similar problem to one posted earlier, however, I'm using Windows Vista. The problem is that color in my document is remarkably different than the 8200 prints. ...

Xerox 6250dp My printer suddenly decided to stop printing blue. The service pages have purple instead of blue. I have changed the print cartridges to no avail. There are light blue squares on the ...

installed a new cyan cartridge, but the blues show up as pink.. the first few sheets worked fine with the blues blue. Now the blue does not show up at all...they are pink. I have run the configuration

I am designing a brochure and using the page number and content of that page in a side bar. For example on page 2 the text runs from bottom left corner reading upwards, is it better to run the text up

The blue toner light is light up but the other 3 are not, it will not let me print so i have no clue what to do. do i need a new blue toner fo it to print no matter what colour i want to print in that

...corner) and then turn the blue, bottom lever counter-clockwise 180 degrees. Slide the Imaging Unit out of the printer half way, then firmly reseat it. Tighten all three blue knobs so that the arrows ...

It is leaving heavy blue streaks on everything printed Hey, blue streaks could be a few different things. The first thing I would check is the image unit. Try swapping out the cyan(blue) image unit ...

I have Phaser 6200 Xerox copier. its printing ok but the envelope after printing comes out with creased corners as if there is some sort of tension in roller / Can you suggest? This creasing happens ...

Re - Phaser 8200DP Solid wax printer; very often doesn't pick up paper from bottom tray, resulting in 'jam' message. Also, tends to fold the top corner of a two-sided (duplex) print job on exiting ...