Questions & Answers for: Rinnai blows gas

Rinnai 2001 natural gas heater when ever i try to start it, it pumps gas in to the chamber, untill it "bangs". it was lighting after repeating process a number of times how ever the pilot light is not

Pilot light keeps going out Rennai model # REH-30DT-P Propane gas heater. I can get the pilot lit and it will light the burner OK. However once the burner turns off the pilot will go out. I have to re

INFRARED HEATER WILL NOT STAY ON. PILOT KEEPS GOING OUT AND UNIT WHEN I TURN THE PILOT ON AND THEN GO TO TURN THE GAS DIAL AROUND TO TURN THE GRATES ON, THE PILOT WILL SHUT OFF. WE HAVE TO BLOW AND ...

no gas coming out of the pilot line. Disconnected the pilot line, pushed the pilot gas button and no gas coming out of the line. Yes the gas is turned on and will come out of the connection prior to ...

pilot light not working in gas heater my pilot light on my gas heater is not working Hi there, you will probably find thepilot light jet is blocked. All you should need to do is use compressed air and

I HAVE A VERMONT CASTINGS RADIANCE HEATER MY PILOT LIGHT WONT STAY LIT I HEAR THE THERMOCOUPLER TRIP THE VALVE BUT THE FLAME WILL GO OUT We had this problem and struggled with it for over a year. We ...

I have a rinnai Titan mk 2 an the pilot light keeps going out causing the heater to shut down. It makes a blowing sound an the flame (on pilot) starts flickering then goes out. Can this be fixed an ...

...gas heater only burns on high heat settings if i change it to anything lower it blows out what does this mean? If this is occurring on windy days, a back draft in the flue termination is blowing the ...

...blows out the unit with the compressor. And we clean the filters. Number 12 code pops up . I think the pilot is sputtering. What do you think we should do? I would never blow out a gas heater with a ...

URGENT Please. I have an old Rinnai Convector 404. It turns off after a few seconds. natural gas heater. I read in your solutions write up to blow compressed air through the gas inlet. I removed the ...