Questions & Answers for: blown channel receiver

Question about STR-DB790 Receiver

1 Answer

...channel may be damaged or there may be a blown fuse for the side with no sound. If a fuse is blown, this is an indication of a fault condition. Also, before assuming a failure, make sure that all the ...

Ad

Question about AVR-2807 Receiver

1 Answer

...channel amp, i think its the one listed. The model number has 2800 in it. Anyway, the 4 main channels make any speaker attached to it sound completely blown, and it's not the speakers. The centre and ...

Ad

Question about 403A Car Audio Amplifier

1 Answer

blown channel only one channel works tried different rca's, can this problem be fixed Was the blown channel working and then quit or was the channel out when you received the amp?

Question about AVR 3808Ci Receiver

1 Answer

Blown Channel on an amplifier If i've blown a channel on a stereo amplifier. what do i check on the board to be replaced besides the transistors. Look for low valued resistors that may look ok, but be

Question about RX-950AX Receiver

2 Answers

blown channel Hi, I have the Rotel RX-950ax. I have one blown channel. It works, but the sound is tinny. Can I fix it or should I shoot it? Thanks for your advice. You cannot fix the receiver unless ...

...channel output ie. not a 2 channel source only, try the test tone setup for 5 or 6 channel balance, if no sound from the center channel still then it is looking like maybe the center channel is

...channel is blown. Its not 100% blown. This has happened to my freind before, and from my long knowlage in audio, the channel is blown, and is not fixable. If you REALLY are attached to it, you could ...

...blown front right channel of a harman kardon avr 347 receiver blown right side front channel oh, your gonna need a paid repairman to fix that, and then you wont be happy with what it will cost, new ...

Question about VSX-D608 Receiver

1 Answer

...blown speaker. I tried other speakers on that channel, but they all sounded distorted. Is there a problem with the channel internally to the receiver? How can I repair it? It sounds like a damage ...

...blown a channel my old (1970) 5000a sansui amp/receiver has blown a channel, hooked up speakers,revered them and right channel does not work, no sound. know little about electronics but would like to ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you an Audio Players & Recorders Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...