Questions & Answers for: Jeep block seals

...going out the weakest spot which is the seals.Who changed the seals?Your transfer case may have a blocked breather if fitted if your breather is fine, then most output shaft seal leaks can be ...

...block (6 cyl). After the motor warms leak self seals and appears to be OK. Only occurs when engine block is cold. there is a oring between the block and the filter housing. be carful because changing ...

...be oil, i would chk. the back of the engine, if its a strate 6, between wear the head meets the block, if v6 or v8 wear intake bolts to heads and mates to block, also chk. the freeze plugs in

...remove flywheel, pry old seal out with seal remove or a screwdriver careful not to damage the block or crank. Clean surface with carberater cleaner or brake cleaner. Tap ne seal in with flat

...and still when it rains I have standing water on the driver side floorboard. Any suggestions? blocked drain holes at the bottom of the door missing plastic membrane that seals off the door ...

There's oil leak on engine block where the oil filter is attached. It's the part between the oil filter and engine block Ok you can disassemble the oil filter and loosen the bolts that connect the ...

5L engines, turn the timing chain tensioner lever to the unlock (down) position. Pull the tensioner block toward the tensioner lever to compress the spring. Hold the block and turn the tensioner lever

...drive There is some work involve in replacing rear main seal, seal sit in the rear of the engine block, the transmission will have to be remove, and the fly wheel to get to the rear main seal.If ...

...right out or off As long as you have all the bolts removed that hold the pan to the bottom of the block. Just make sure you drained all the oil and when you have all the bolts off, lightly tap the ...

...& It Still Leaks From The Bottom Of The Balancer timing cover is leaking oil betwwen cover and block Disconnect the negative battery cable. Remove the drive belt(s), fan and fan shroud. If ...