Questions & Answers for: blinking red light kenwood radio

...aside from the green light. Thanks, Mike On my two channel radio a blinking green light means that it is scanning between the two channels. I can turn off the scanning and the light stops

...red led is blinking, sounds like a bad battery. Batt voltage is a nominal 7.5v. anything lower than 6.25v and the low battery beep starts. A rapid beep, and no red led blinking, an error in the ...

...a red blinking light behind the faceplate that is still flashing check your connections. i believe only the standby wire is connected.. or the built in amplifier detects a short on the speaker

...red light is blinking and the screen says E-03 and i am not sure what it means Red lights and error codes usually mean a fault ha occurred. Usually blown output transistors or input power supply caps ...

...i think its still on. The blinking red light is to let thieves know the face is not on the radio and is not worth stealing. the blinking red light doesn't draw enough power to drain your

...back in the charger, red light comes on and may or may not start blinking. Repeat until the red light does not blink and it will charge like normal. Beats me as to what is going on but it is a

...Blinking Red "The battery pack is defective or the battery pack contacts are not properly mated with those of the charger" Below is a link to the ...

...red blinking light radio charges at work but will not charge on home charger, the charger has red blinking light If the radio will charge on one charger and not the other, the one with the blinking ...

... green light mean? and what does the (SC) red light mean? also it has a H/L switch on the back.... GP68 desktop charger what do the lights mean Batboard This link may help answer some of your ...

blinking red only on the programmed channels I can read and program the radio. But when I turn it on it doesn`t give any sound and doesn`t transmit or receive. The red blinking happens only when i put