...blend door, or blend door actuator may be faulty. You can check this by watching the movement of the blend door actuator while you turn the temp selector knob. If the actuator is working, then it may ...
...blend door is not working? If yes, it's the control head or the temp blend door motor on th plenum case under the dash. Buy used on ebay. DO you have manaul or electroic controls? If electronic A/C ...
...the the blend door. If the control head is ok, then it could be the blend door itself or possibly the actuator. Unfortunately, you may have to remove the whole dash to get at the actuator or blend ...
blend door temporarily I would repair the problem if I have to disassemble the varioius parts to get at the air doors --- In-Vehicle Temperature Sensor Removal & Installation To Remove: In-vehicle
...blend door is controlled by the A/C electronic door actuator motor. The A/C electronic door actuator motor provides a variable number of temperature blend door positions. Temperature control position ...
Question about 2002 Mustang
blend door for heat some times does not open understand that it is control by motor sometimes my blend doors do not open i understand it may have a motor 1 Possible bad actuator/servo (motor) 2 ...
...Blend door actuator feedback failure (bad servo) 24: Mode door actuator feedback failure (bad servo) 25: Ambient temp sensor failure 26: ATC In Car thermister failure (ATC only, bad ATC head or ATC ...
Question about 2003 Grand Marquis
...blend air door and blend door actuator. Locate the blend door. Remove the actuator and open the door by hand. If you get heat, the actuator or the control head is bad. FWIW, the actuator is the most ...
Question about 2003 Grand Marquis
...blend door actuator has tested good. Where should i check next? Seeing as your blend door is actuated by an electric motor, we can rule out a vacuum issue. I would have to say, either there is ...
...blend door actuator (commonly known as the air blender) on a 2005 Lincoln Aviator is a moderately challenging task that requires some mechanical know-how and the right tools. The air blend door ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions