Questions & Answers for: Honda bleed coolant

Question about 1997 Odyssey

3 Answers

...coolant bleed screw is located near the thermostat housing on Odysseys with 4-cylinder engines Fig. 4: Always install the thermostat with the small pin at the top. The rubber thermostat seal is ...

Ad

bleed my coolant system there should be a bleed nipple at the highest point of the water jacket somwhere around the head locate bleeder first/ get a spanner that fits the bleeder/ normally the coolant

Ad

...coolant bleed screw is located near the thermostat housing on Odysseys with 4-cylinder engines Fig. Fig. 4: Always install the thermostat with the small pin at the top. The rubber thermostat seal is ...

Question about 2005 CBR 1000 RR Fireblade

0 Answer

bleed air from coolant system, if not is there a method, or is it not necessary, at that point is there a thermostat, do they require servicing. Bike runs at 70-80c but climbs to 100 fairly quick when

Question about 2005 CBR 1000 RR Fireblade

2 Answers

...bleed it out. if the coolant smells of exhaust or looks oily, dont drive or you can crack a head or worse and will cause damage to something, also since it only takes a second its a good idea to pop ...

Question about 1996 Accord

1 Answer

...to hot but the blower fan is off bleed out some coolant until the air stops bubbling out if this doesnt work you may need a new idle control valve situated behind the inlet manifold near the ...

...coolant bleed screw. Just run the engine with radiator cap off for 30 minutes, keeping the coolant level topped of. You should hear the fan come on 2-3 times. Replace cap and make sure overflow tank ...

...bleed it. If there is no small fitting on top of the engine to allow air to escape, you have to run the engine with the radiator cap or filler tank cap loose until the thermostat opens, then add more ...

Question about 2008 CB 1300 S

1 Answer

...coolant bleed a new radiator try this http://www.fireblades.org/forums/honda-cbr400rr/92374-how-bleed-coolant-following-radiator-change-nc23.html How to bleed the coolant following radiator change on ...

...coolant temperature sensor nearto the thermostat housing. Unplug, loosen then plug back up. To bleed, loosen slightly to release trapped air. Once air is relieved, only liquid will come out at this ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1992 Honda Accord
1992 Honda Accord

2,998 Questions

1991 Honda Accord
1991 Honda Accord

2,681 Questions

1995 Honda Accord
1995 Honda Accord

1,631 Questions

1996 Honda Accord
1996 Honda Accord

1,636 Questions

1998 Honda Accord
1998 Honda Accord

1,570 Questions

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...