Questions & Answers for: Hyundai Tiburon bleed abs system

Question about Motor 2000 Tiburon

1 Answer

...ABS System, It is Possible The wire got stretched and broke off INSIDE Outer Wire Insulter. OR Just Totally UNKNOWINGLY Broke it or Disconnected it. OUTER CV Joint? Match up PERFECTLY? Sense Light ...

Ad

bleed to a 2006 hyundai tiburon The tiburon's brakes are simple, there's no special technique to bleeding them. Are you sure you're bleeding them correctly? If you are bleeding them correctly, then it

Ad

bleed now?, mayeb i screwed in too far and need more fluid? U need to bleed the system, if u have ABS then the dealer will need to do the job as it requires special ABS brake system bleeding equipment

Question about 2003 Tiburon

1 Answer

...and if i push the brake it shuts off Have you checked to clutch fluid? Did you disconnect and hoses or fittings that are part of the clutch system. You may need to bleed the system to get the air

Question about 2003 Tiburon

2 Answers

...system, but the right rear keeps pumpin out air. Help...... The caliper boot looks fine, but nothing but air and spurting fluid. replaceboth calipers on rear and bleed again What method are you using ...

...of fluid in the new one. It's a critical part and should obtained from Hyundai. Have it pressure bled, or have the dealer do it. The ABS sometimes requires special equipment to bleed the

...known ,this vehicle has ABS and depending on the system you cannot bleed the brakes without dealer software to make the ABS system open to allow the fluid through .Sorry got to go first customer ...

...bleed there will be clutch there but 2 or 3 pumps later its gone. If the master cylider and slave cylinder have been rebuilt and they won't hold, it sounds like there is an internal leak in one ...

Question about 2006 Tiburon

1 Answer

abs brake sensor This doesnt happen all the time but periodically when the brake is pushed on a 06 tiburon the brake grabs and abs light comes on when pushed again light goes off and brakes work like ...

...may be that there is air in the clutch system and the clutch is not disengaging properly. Try bleeding the clutch system and work up from

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...