Questions & Answers for: Hyundai Elantra bleed

How to replace and bleed slave cylinder Hyundai Elantra '92 How do I replace and bleed slave cylinder for 1992 Hyundai Elantra 1.6L ? Thanks undo the fluid line onthe old one .the removeit attatch ...

...the clutch may be worn out and needs to be replaced. Also if you fill the resivor you may need to bleed the system. Fill the resivoir with normal brake fluid (DOT 3) them locate the bleeder screw

...been doing this for 6 weeks,fluid doesnt go down,cant find no leaks, but air comes out each time i bleed them Did you bench bleed the master cylinder? You should try bleeding the lines going to the ...

...it be the therma stat yes, or head gasket. Try replacing thermostat first. make sure you refill and bleed the system after replacing. Hondas have to be bled to get air out of coolant passages. there ...

Hyundai Accent 2002 My clutch fluid is completely empty. Can I just add more or do I have to bleed the line or something? You have a bad part, the slave, the line, the master, one of them has sprung a

...in forward gear. Good Luck!!! im having almost the same issue, I was told by the dealer to bench bleed the master cylinder, you do this by removing the master cylinder and placing it in a vice and ...

replaced caliper but im having problems bleeding brakes i replaced the rightside caliper but now there is no brake fluid going to the caliper bleed left rear caliper then retry..

...smelled fuel, and saw that rubber lines leaking. Replaced lines, and truck will not start. He never bleed fuel system and need help in trouble shooting and in what order. Truck is spotless. No dents ...

...new break pads and refilled the fluid no I lost the pressure in my breaks after removing but not bleeding the hose to the calipers for my front breaks. You need a specil tool to bleed the ABS ...

what would cause there to be no brakes what so ever even after replacing all the broken brake lines and bleeding them all on a 2003 Hyundai elantra? I have replaced all broken or rotten lines on a ...